top of page
(336) 659-0641
Call or Leave Message 24/7
(336) 403-8027
Text Message Only 24/7
2026 Store Hours
Looking Forward To a Great 2026. Stop By and Visit Us.
5272 Germanton Road
New Handguns
New Glock 19 Gen6 9mm
$639.99
New Glock 19 Gen6 9mm
Features:
Improved grip texturing with trigger guard undercut.
Flat faced trigger
New optic system.
Capacity: 15rd
Comes with box and 3 magazines
Features:
Improved grip texturing with trigger guard undercut.
Flat faced trigger
New optic system.
Capacity: 15rd
Comes with box and 3 magazines
New Canik METE MC9 Prime 9mm $599.99
New Canik METE MC9 Prime in FDE 9mm
Features:
Ported barrel and slide for less muzzle rise.
Aggressive slide serrations for improved grip.
Crisp, light flat faced trigger.
Optic Ready
Capacity: 17+1
Comes with box, 2 magazines and holster
Features:
Ported barrel and slide for less muzzle rise.
Aggressive slide serrations for improved grip.
Crisp, light flat faced trigger.
Optic Ready
Capacity: 17+1
Comes with box, 2 magazines and holster
S&W M&P Shield Plus Optic Ready
$489.99
Features:
Includes 10, 13, and 15rd magazines
18-degree grip angle for a more natural point of aim and better recoil management.
New flat trigger allows for consistent finger placement for accurate, repeatable, comfortable shooting.
Optic Ready with Night sights.
Includes 10, 13, and 15rd magazines
18-degree grip angle for a more natural point of aim and better recoil management.
New flat trigger allows for consistent finger placement for accurate, repeatable, comfortable shooting.
Optic Ready with Night sights.
PSA Dagger Full Size $419.99
FULL OF FEATURES:
SW3 Slide Cuts
Threaded Copper Barrel
Optic Cut for RMR Co-witness Sights
Compatible with Glock magazines and sights.
SW3 Slide Cuts
Threaded Copper Barrel
Optic Cut for RMR Co-witness Sights
Compatible with Glock magazines and sights.
FN 509 Tactical 9mm
$679.99
Features:
Red dot and suppressor-ready.
24rd magazine for higher round-count training sessions.
FN Low-Profile Optics-Mounting System.
Suppressor-height 3-Dot night sights.
External extractor; loaded chamber indicator
Flat faced trigger
Fully ambidextrous controls
MIL-STD-1913 accessory mounting rail
Cold hammer-forged stainless steel barrel with a recessed target crown
Improved front and rear cocking serrations.
Includes two magazines, case, locking device and owners manual.
Red dot and suppressor-ready.
24rd magazine for higher round-count training sessions.
FN Low-Profile Optics-Mounting System.
Suppressor-height 3-Dot night sights.
External extractor; loaded chamber indicator
Flat faced trigger
Fully ambidextrous controls
MIL-STD-1913 accessory mounting rail
Cold hammer-forged stainless steel barrel with a recessed target crown
Improved front and rear cocking serrations.
Includes two magazines, case, locking device and owners manual.
S&W M19 No Lock 357mag
$999.99
This K-Frame revolver pays homage to the most iconic and collectible designs created by Smith & Wesson, now enhanced to meet the demands of todays shooters.
Featuring carbon steel barrel; double action/single action; checkered wood grip; Red ramp front sight and black blade adjustable rear sight.
Featuring carbon steel barrel; double action/single action; checkered wood grip; Red ramp front sight and black blade adjustable rear sight.
New Rifles/Shotguns
Glenfield Model A in 6.5 Creedmoor $439.99
This American-made rifle was built with simplicity in mind - no frills, just the essentials. Whether it's your first season or your fiftieth, it's a straightforward tool you can trust - affordable, reliable and ready for the field.
Features:
Threaded barrel
Detachable Magazine
Adjustable Trigger 3 to 5 LBS
One Piece Picatinny Scope Base
Features:
Threaded barrel
Detachable Magazine
Adjustable Trigger 3 to 5 LBS
One Piece Picatinny Scope Base
Tikka T3X Hunter in 30-06 SPRG $979.99
The T3x Hunter is designed for the shooter who appreciates the warm feel of a wooden stock combined with solid performance.
Features:
Crisp Single Stage Trigger
Threaded Barrel
Features:
Crisp Single Stage Trigger
Threaded Barrel
Savage Arms 110XP Hunter in 308win w/ Vortex Scope
$639.99
Features:
Adjustable trigger
Vortex Crossfire II 3-9x40 scope included
Improved stock texturing.
Adjustable trigger
Vortex Crossfire II 3-9x40 scope included
Improved stock texturing.
Ruger American Gen2 in 308win
$629.99
The Ruger American II is the latest and greatest in the line up from Ruger.
Features:
CNC machined Bolt with 70 degree throw.
Upgraded stock with splatter finish for extra grip.
Removable spacer for adjustable length of pull.
Threaded barrel installed with radial muzzle brake.
3 position safety
Included is a picatinny mount for scopes and 1 detachable magazine.
Features:
CNC machined Bolt with 70 degree throw.
Upgraded stock with splatter finish for extra grip.
Removable spacer for adjustable length of pull.
Threaded barrel installed with radial muzzle brake.
3 position safety
Included is a picatinny mount for scopes and 1 detachable magazine.
Beretta A300 Ultima Patrol 12ga $1059.99
ELEVATE YOUR TACTICAL SET-UP with the new Beretta A300 Ultima Patrol – engineered to be ultra-reliable and easy to manipulate.
Features:
7 + 1 Capacity
19.1in Barrel
Enlarged Controls
Ample Accessory Mounts
Features:
7 + 1 Capacity
19.1in Barrel
Enlarged Controls
Ample Accessory Mounts
New ARs and AKs
PSA AR "PA-15" in 5.56NATO
$589.99
Features:
Forged 7075-T6 A3 AR upper machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications, fastened with Grade 8 screws, and Staked Per Mil-Spec. The carrier is an 8620 steel M-16 full-auto profile.
Forged 7075-T6 aluminum Lower Receiver.
16in 1:7 Twist Nitride Barrel
New Hex Rail for more Accessory Mounting Positions.
Magpul MOE Stock and Pistol Grip fitted on a 7075-T6 buffer tube.
30 Round Magpul Gen2 Pmag
Forged 7075-T6 A3 AR upper machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter 158 steel bolt. Gas Key Hardened to USGI Specifications, fastened with Grade 8 screws, and Staked Per Mil-Spec. The carrier is an 8620 steel M-16 full-auto profile.
Forged 7075-T6 aluminum Lower Receiver.
16in 1:7 Twist Nitride Barrel
New Hex Rail for more Accessory Mounting Positions.
Magpul MOE Stock and Pistol Grip fitted on a 7075-T6 buffer tube.
30 Round Magpul Gen2 Pmag
PSA AR "M4A1" 14.5in 5.56NATO
$669.99
This rifle has an old school military look for a very affordable price.
Features:
14.5in P&W Nitride Barrel
Forged 7075-T6 A3 AR upper machined to MIL-SPECS and hard coat anodized.
Quadrail equipped with rail covers and vertical grip.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
Lower is forged 7075-T6 aluminum with "Property of US Govt" and "M4A1" markings.
Comes with metal rear flip up sight and metal magazine.
Features:
14.5in P&W Nitride Barrel
Forged 7075-T6 A3 AR upper machined to MIL-SPECS and hard coat anodized.
Quadrail equipped with rail covers and vertical grip.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
Lower is forged 7075-T6 aluminum with "Property of US Govt" and "M4A1" markings.
Comes with metal rear flip up sight and metal magazine.
PSA AR "PA-15" Pistol in 5.56NATO
$559.99
Features:
7.5" 4150V chrome moly steel, nitride coated barrel. 5.56 NATO with 1:7 twist.
Forged 7075-T6 A3 AR upper machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
New Hex Rail for more accessory mounting positions.
Lowers are forged 7075-T6 aluminum.
Magpul Pistol Grip
Adjustable H&R Pistol Brace
7.5" 4150V chrome moly steel, nitride coated barrel. 5.56 NATO with 1:7 twist.
Forged 7075-T6 A3 AR upper machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
New Hex Rail for more accessory mounting positions.
Lowers are forged 7075-T6 aluminum.
Magpul Pistol Grip
Adjustable H&R Pistol Brace
PSA 10.5in AR Pistol "PA-15" in 5.56NATO
$539.99
Features:
Forged 7075-T6 Upper and Lower to mil-spec standards.
Full-auto profile bolt carrier group. Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
10.5in Chrome Moly steel Nitride coated barrel
Carbine-length gas system.
Removable Carry Handle
Adjustable Pistol Brace
30rd Metal Magazine
Forged 7075-T6 Upper and Lower to mil-spec standards.
Full-auto profile bolt carrier group. Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
10.5in Chrome Moly steel Nitride coated barrel
Carbine-length gas system.
Removable Carry Handle
Adjustable Pistol Brace
30rd Metal Magazine
PSA 7.5in AR Pistol 300Blkout
$559.99
Features:
7.5in 4150V Chrome Moly Vanadium Nitride Barrel.
Forged 7075-T6 A3 AR upper, machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
Lower is forged 7075-T6 aluminum.
PSA's new Hex Rail for more accessory mounting positions.
Magpul Gen2 pmag
7.5in 4150V Chrome Moly Vanadium Nitride Barrel.
Forged 7075-T6 A3 AR upper, machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
Lower is forged 7075-T6 aluminum.
PSA's new Hex Rail for more accessory mounting positions.
Magpul Gen2 pmag
PSA 7.5in AR Pistol in 300Blkout
$559.99
Features:
7.5in 4150V Chrome Moly Vanadium Nitride Barrel
Forged 7075-T6 A3 AR upper, machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
Lower is forged 7075-T6 aluminum.
PSA's new Hex Rail for more accessory mounting positions.
Adjustable H&R Pistol Brace
Magpul Gen2 Pmag
7.5in 4150V Chrome Moly Vanadium Nitride Barrel
Forged 7075-T6 A3 AR upper, machined to MIL-SPECS and hard coat anodized.
Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec.
Lower is forged 7075-T6 aluminum.
PSA's new Hex Rail for more accessory mounting positions.
Adjustable H&R Pistol Brace
Magpul Gen2 Pmag
Used Handguns
bottom of page